Popular Sell Rolling Shutter Door Roll Forming Machine

Popular Sell Rolling Shutter Door Roll Forming Machine is an automated equipment designed specifically for the processing of metal rolling shutter door panels. Its core function is to process metal coils (such as galvanized sheet, color steel sheet, aluminum alloy sheet) into rolling shutter door panels with specific cross-sectional shapes (such as arc, groove, composite reinforcement) through continuous forming processes. It is widely used in the production of rolling shutter doors in industrial plants, shops, garages, warehouses and other scenarios. It replaces the inefficient processes of traditional manual splicing and manual pressing, solving the problems of “poor accuracy, low efficiency, and high consumables” in traditional production. It is the core equipment for modern rolling shutter door manufacturing enterprises to achieve large-scale and standardized production.

Working principle: Five steps to achieve automated molding of rolling shutter door panels

The rolling shutter door forming machine follows the continuous production logic of “feeding guiding forming cutting discharging”, and does not require manual intervention throughout the process. The specific process is as follows:
1. Raw material feeding:
Fix the metal coil on the feeding rack, clamp the coil with a hydraulic tensioning device, and activate the automatic correction system to ensure that the center of the coil is aligned with the feeding direction; ​

2. Guided flattening:
The coil enters the feeding guiding system, and the guiding roller adjusts the position of the substrate. The flattening roller eliminates the warping of the coil and uniformly transports the flattened substrate to the forming system; ​

3. Progressive molding:
After the substrate enters the molding system, 15-25 sets of molds gradually press the substrate in the preset order (from initial folding to final molding), and the servo pressure system adjusts the pressure of each set of molds in real time to ensure accurate cross-sectional shape of the door panel; ​

4. Fixed length cutting:
The formed door panel is continuously transported to the cutting system. The PLC triggers the hydraulic cutting device according to the set length, and the anti deformation fixture clamps the door panel to complete the cutting. The cut door panel is transported to the discharge area through the conveyor belt; ​

5. Continuous production:
After the cutting is completed, the feeding system automatically transports the next section of substrate, and the molding and cutting processes are synchronously connected to achieve continuous production of “raw material in finished product out” without stopping and waiting.

Product Attributes

Pattern diagram：