Single layer roofing panel roll forming machine

1006

　　Single layer roofing panel roll forming machine could be used to make any type roof panle sheet separately. Singly layer is opppoite to the double layer machine. So you can use singly layer roofing sheet machine to make round wave roofing panle, IBR type, Corrugated Roof Sheet and others.

　Single Layer roofing sheet machine is composed by the following elements:

Roll forming machine consists of uncoiler, coil sheet guiding device, main roll forming system , cutting device, hydraulic station, PLC control system and support table.

Main technical parameters:
1	Suitable material: color steel sheet, PPGI
2	Thickness of raw material: 0.25-0.8mm
3	Yield strength of material: 235Mpa-550Mpa
4	Forming speed: about 0-25m/Min
5	power	Main motor power: 5.5KW (Depend on final design)
		Hydraulic station power: 3.5KW (Depend on final design)
6	Uncoilers loading capacity Max. Capacity: 5000kgs (can be increased to be 10T)
7	Controlling system: Mitsubishi PLC & Converter
8	Machines weight: about 7500kgs
9	Machines size: about 7.5m×1.8m× 1.4m (Depend on final design).

Single layer roofing panle roll forming machine has serval types for your referene:

Both of those two type frame machine could be used to make roof panle sheets easily but they are different in machine frame. The pillar type is easy to get fast speed and process heavy duty work. But for the middle plate type, they have economic cost .
In our knowledge base, we will share more knowledge about those type different.