Troubleshooting of the installation of the double layer roll forming machine

Troubleshooting of the installation of the double layer roll forming machine
The double layer roll forming machine is easy to install, but still we need to check every part well before we operate the machines, below are some tips on the Troubleshooting of the installation of the double layer roll forming machine, please check it, if you have any questions, please feel free let us know!

Troubleshooting of the installation of the double layer roll forming machine - Troubleshooting of the installation of the double layer roll forming machine
Manual work, not work automatically:
1 has cut the number of sheets is greater than or equal to the set number of sheets.
Treatment: clears the current number (ALM key press) sheets.
2 did not count the number or length set.
3 automatic switch button is damaged. (Available at any sign LAY3 series knob instead)

Manual and automatic do not work, the display does not show:
A power supply is not normal
2 Fuse. Solution: Replace the solenoid valve and check the lines are not damaged. (Fuse type 6A)

Unscrew the automatic, cutter has just gone up:
A limit switch open circuit damage.
2 solenoid valve stuck. Solution: Turn off the pump, use a screwdriver to poke back and forth from the solenoid valves at both ends of the solenoid valves manual reset pin until just feel elastic.

As long as an open pump, cutter all the way down:
Solenoid valve stuck. Solution: Turn off the pump, use a screwdriver to poke back and forth from the electromagnetic solenoid valves at both ends of the solenoid valves manual reset pin until just feel elastic.
If the solenoid valve is often stuck, you should change the oil and clean the solenoid valve.
* Solenoid valve stuck should start with a shallow end to the other end of the barrel, and then from
Activities at both ends poke back and forth.

Troubleshooting of the installation of the double layer roll forming machine 1 - Troubleshooting of the installation of the double layer roll forming machine

Leave a Reply

Your email address will not be published. Required fields are marked *