Tile press presentation mode and welding Introduction

Tile press presentation mode and welding Introduction

Tile press, and the host Salvatore conveyors, when parking, stop the extruder, then stop the rest of the device.
Tile press rolls up and down the centerline of the line should be in the same plane, the plane is not greater than 1mm, each row of the upper and lower roll gap equal to the gap deviation + 0.1mm. By conventional feeler gage or debugging. Roll forming machine of pressure plate, solemn appearance, and the appearance of smooth, corrugated uniform, high utilization, high strength, high degree of automation, low cost and durability. The main pan is suitable for medium-sized enterprises civil construction, such as factories, machines garages, stadiums galleries, theaters and the like. Tile press configuration will have a lubricating system, the machine is running, all carrying automatic bearings, transmission gears and other parts of the movable rail lubrication. Automatic discharge, whichever blank work program

5 thumb - Tile press presentation mode and welding Introduction
Tile press welding:
Tile press assembled at the welding stress, if the binding of small weldment, the weldment will produce a corresponding change in the size or shortening or bending or warping. If the binding of weldments large deformation of weldment not free, but in composite panels pipeline welding stress will produce local strain while producing greater residual stress. Peak residual stress weld zone can reach the yield strength values ​​of the material.
Therefore, welding stress their size and coefficient of thermal expansion of steel concerning joint restraint. Coefficient of expansion of steel structure changed little, while the binding of the form and structure of nodes, pressure-watt machine welding sequence, thickness, plus the degree of tightening clamp various factors

1 thumb - Tile press presentation mode and welding Introduction
Tile press assembled at the welding stress, if the binding of small weldments, such as having a small thickness or in a free unconstrained state, the weldment will produce a corresponding change in the size or shortening or bending or warping. If the binding of large weldments, such as the thickness of the larger, complex shape or because of man-made jig is applied and under the strong binding state, when the weldment can not be freely deformed, but in welding stresses local produce strain, while large residual stresses. Peak residual stress weld zone can reach the yield strength of the material value

If you  want to know about the Tile press presentation or the Double layer roll forming machine you can contact us with Email : roofingmachine@zhongtuocn.com

Leave a Reply

Your email address will not be published. Required fields are marked *