Standard Minrib Profile 10-71-780/1062 Roll Forming Machine

Standard Minrib Profile 10-71-780/1062 Roll Forming Machine could be used to make the standard minrib roofing sheet in batch fully automaitic. The following drawing profile is the one which I named as Standard Minrib Profile 10-71-780/1062 Roll Forming Machine.

The description of this Standard Minrib Profile is that the wave distance is 71-wave, height is 24, the valid width could be many, like you can output 915mm or 1000mm or another others, depends on the input coil width. The following two sizes are mostly popular, like 1220mm and 915 as the feeding coil width.

standard Minrib - Standard Minrib Profile 10-71-780/1062 Roll Forming Machine

Standard Minrib Profile roll forming machine working speed is aroound 25m.min, the following are machine picture for your reference:

Standard Minrib Profile Machie - Standard Minrib Profile 10-71-780/1062 Roll Forming Machine

Here are Standard Minrib Profile roll forming machine paramters for your reference:

3.Forming system

 

1).Number of forming steps:17steps

2).Material of shaft:45# steel .
Outer diameter=80mm

3). material of roller:45# steel

4).Main motor power:5.5kw

5).Max Speed of forming:10m/min

6).Voltage:380v 50Hz 3 phases

 

For this machine, if you want to know more information, please contact us at any time.

namecard thumb - Standard Minrib Profile 10-71-780/1062 Roll Forming Machine

Leave a Reply

Your email address will not be published. Required fields are marked *