High Quality Galvanized Roof Panel Steel Roll Forming Line

High Quality Galvanized Roof Panel Steel Roll Forming Line

General Description:
WLFM series roll forming machine consists of uncoiler and its base, infeed guide, fixed position driven forming stations, cutting equipment, hydraulic station, PLC control console, and unload product run out table.
Our company has hundreds of profile models for this series roll forming machine, such as WLFR25-248-992, WLFR50-250-1000, WLFR18-76-998 and so on. we can design different kinds of profile and fittings for machine, as per customers’ requirements.
1. Components for steel roofing roll forming machine:
The roll forming machine consists of manual uncoiler, infeed guide, fixed position driven forming stations, cutting equipment, hydraulic station, PLC control console, and manual unload product run out table.

1 - High Quality Galvanized Roof Panel Steel Roll Forming Line

.2. Technical Parameters:

Material specification Aluminum, alu-zinc, galvanized and pre-painted galvanized steel.
Thickness 0.3 mm to 0.7mm.
Main motor power 4 kw.
Hydraulic station power 3 kw.
Feeding width 914/1000/1200mm.
Cover width WLFM 18-76-760/836/988 is 760/836/988mm respectively.
Yield stress 235Mpa (33KSI) ~ 345Mpa (50KSI).
Roll forming Speed 12 m/minute.
Cutting Tolerance +/-2.5mm(length≤5000mm); +/-3.0mm(5000mm<length≤10000mm).
Manual Uncoiler Max. Capacity: 5000kgs.
Coil inner diameter 508mm.
Voltage As per customer’s request.
Numbers of stands 18 stands/stations/pairs.
Type of cutting Roll-formed and length-set profile cutting.

2 - High Quality Galvanized Roof Panel Steel Roll Forming Line

3. Material of Main Equipment:

Roller Material High grade S45C forged steel, coated with hard chrome.
Active Shaft Material High grade S45C carbon wrought steel, diameter 76mm.
Electric Elements PLC control console, touch screen and transducer, from Siemens, Germany.
Other elements, from Schneider Electric, Germany.
Cutter Blades Cr12MoV steel with quenched treatment, hardness HRC58~61,
wear-resistance, good steel structure, long life.

 

4. Process Sketch:
Uncoiling the sheet Infeed guiding Roll forming →Measure length →Cutting the panel →Panels to the supporter (option: automatic stacker).

20170806205412 - High Quality Galvanized Roof Panel Steel Roll Forming Line
5.Standard Equipment of Machine:
Manual Uncoiler                1set

   Infeed Guide                      1set
   Roll Forming Station          1set
   Post-cut Equipment           1set
   Hydraulic Station                1pc
   PLC Control Console         1pc
   Product Support Table       2pcs

Leave a Reply

Your email address will not be published. Required fields are marked *