Gutter Roll Forming Machine
The Roll forming machine can Manufacturing a various kinds of gutters profile to satisfy customers� required. Produced gutters are in fashionable outline and high superiority. Gutters are so mostly used in our daily life, so this machine will surely bring you a lot of profitable benefits to you.
D coiler 5 ton cap.
Punching press 20 tone 2 nos.
Entry Gate with
Roll Forming Line with 14 station , 7 Gear Boxes & 10 H.P. electrical.
Control Panel semi auto
Cutting Unit (Hydro.)
Maximum sheet width that can be formed : 450mm
Maximum sheet thickness in CRCA Strips that can be formed : 3 mm(M.S.)
Horizontal distance between shafts : 400mm
Number of forming stations : 14 nos.
Vertical station : 12 nos.
Total HP for Line : 16
Speed of the machine : 4mt/minit
Size of machine : 6300 x 1200 x 1000 mm
Coil weight : 10 MT Max
Coil width : 400 MM
Coil bore : 450 MM min, 510 MM max dia.
Mandrel movement : Manually adjusted
Back Tension : Manually adjusted
20 tone power press
2 nos. 3 HP
Entry gate will be provided for movement of sheet to roll former.
The main base is MS fabricated structure and adequately ribbed to minimize the distortion. It is accurately machined on top and bottom surfaces the threaded holes are made on the bed for positioning the stands.
Mill stands (Station)
The stands are mounted on the bed of the machine the line alignment can be easily done due to guide ways arranged on the bed of the machine. Each forming head consists of a fixed housing and sliding type out board housing. The mill stands will be arranged to locate shafts mounted on taper bearings. For the top shafts the bearings are housed in the cartridge type bearing blocks. The bottom shaft bearings are located in the bored machined in the housings. The bottom arbors are fixed in position whereas the top arbors along with cartridge blocks could be raised or lowered in vertical guides machined in housings.