Floor Decking Tile Press Roll Forming Machine

Floor Decking Tile Press Roll Forming Machine

1. Hydraulic Un-coiler

Width of raw material: 1250mm
Max Capacity: 10000kgs
Max out diameter of coil: 1800mm
Inner diameter of coil: 500-600mm
Hydraulic feed and brake

2. Shearing Device

Shearing way: Manual
The material of blade: Cr12 with Heat treatment HRC60-62
c60 floor decking panel machines - Floor Decking Tile Press Roll Forming Machine

3. Main Forming System

Feeding width: 1219mm
Product width: 1000mm
Height of waves: 50mm
Thickness of sheet: 0.8-1.2mm
Material: GI sheet coil
Roller stations: 30 rows
Material of Roller: Cr12
Surface of Roller: Hard Chrome plating and High-frequency treatment
Diameter of main shaft: 90mm C45steel, modulation
Thickness of Shell frame: 30mm
Main Bearings: 60311
Power of main motor: 11kw, with speed reducer.
Forming Speed: 3-12m

4. Cutting device

Oil pump station 1set
Motor power of Oil pump station: 5.5kw
Forced air cooling device available
Cutting mould: 1set
Material of blade: CR12 with heat treatment HRC60-62
Pressure of cutting: 20 tons.

5. Run-out Table

Frame: 8# steel groove welded
Length: 3m
Quantity: 4 pcs

6. Electrical System

PLC and HMI touch Screen (Taiwan Delta or Siemens)
Automatic length measurement
Automatic quantity measurement
Length measurement: Rotary Encoder
Over current protection for control system, aviation plugs
Cutting off type: Paused to cut, moving automatically after cutting.
Power: 380V 60Hz

Advantage of our deck floor roll forming machine
High quality
Lower cost
Durableness
High efficiency
Reliable working
Low failure rate
Low energy consumption
Trouble free after sales service

Leave a Reply

Your email address will not be published. Required fields are marked *