Double Layer Steel Tile Roofing Roll Forming Machine
1. A stylish and attractive design, giving the appearance of a traditional roof tile.
2. Resistant to frost, heat, hail and gales; 100% waterproof, due to the lateral run-off channel on each sheet for several models.
3. The raw material can be in different color, with elegant and noble looking. It is widely used as the garden like factory, hotel, exhibition, villa, civil construction etc.
5.5kw Main Power Color Steel Roofing Sheet Tile Roll Forming Machine
1.Forming Tile Show:
Main Forming Machine Technical Pamameter:
|Material of shaft||45#steel adjustable treatment|
|Out diameter of shaft||φ70mm|
|Material of roller||Cr12, quenched treatment HRC58-60°C|
|Number of forming rollers||Down for 840: 13 rows
Up for 850:10 rows
|Main frame||300 H steel|
|Thickness of medium plate||16mm|
|Transportation system||Chain transportation|
|Thickness of chain||1 inch|
|Main motor power||3 KW|
Hydraulic Shearing System:
|Material of blade||Cr12,heat treatment 60-62°C|
|Shearing system||It is controlled by gear wheel oil pump. After filling the hydraulic oil into the hydraulic oil tank, the pumps drive the cutter machine to begin the cutting job.
The system includes a set of hydraulic tank, a set of hydraulic oil pump, two hydraulic pipes. And two sets of electromagnetism valves.
Power of the oil pump: 4kw
Hydraulic oil :40#
|Screen display||5.7 inches touch screen|
|Main computer control cabinet||It adopts industrial computer to control. The target piece’s length is adjustable and digit of it can be adjusted. Computed mode has two modes: automatic and manual one. The system is easy to operate and use.
Processing precision : within 1.00mm
It contains liquid crystal screen, programmer, transformer for the electronic machines and kits of every part.
Transducer brand is TaiWan”taida”
The seller should provide Chinese and English language screen.