Corrugated panel roof sheets roll forming machine is made of eight main parts: decoiler, feeding, transmission, roll forming, cutting, hydraulic station, control station, run-out table. The suitable material is galvanized and pre-painted steel sheets; it is used for the roof of modern buildings with better anti-press and anti-bending performance.
Here are some simple corrugated panel drawing profiles for your reference:
Finished products samples made by our machine:
Based on the design, we make machine like the following:
Main elements of corrugated panel roof sheet roll forming machine:
|1||Decoiler||Hydraulic, manual or motor (customize)|
|2||Leveling Part||Guarantee that the products are neat|
|3||Roll forming machine||Check detail below|
|4||Hydraulic Station||Hydraulic tank, a set of hydraulic oil pump, two hydraulic pipes. and two sets of electromagnetism valves|
|5||Electric Control System||1.Adopted PLC, transducer, touch panel from Delta Taiwan to ensure high speed with stability, precision and lifetime.|
|6||Run-out table||Manual and automatic|
Main parameters of corrugated panel roof sheets roll forming machine
Feature: Ensure the stability, accuracy and long life.
Voltage: customize by customer.
Method for fixing roller: arch type.
Material of frame: 350H steel welded
Transmission method: chain transmission.
1). the main shaft material: No. 45 steel quenching and tempering treatment, the outer shaft diameter is90mm
2). Wheel material: quenching process of GCr15 bearing steel HRC58-60
3) Roller: 16 stations.
4) Forming speed: 12M per minute.
Detailed pics about this machine: