Horizontal hydraulic arch machine

Horizontal hydraulic arch machine

Horizontal hydraulic arch machine features: built different uses and construction, also can arch between the two buildings, but also in existing upstairs floor, not only solve the waterproof problem and increase the spatial diversity of the design style, strong adaptability, whether prosperous blocks or remote small town, aesthetic, economic applicable.

1 215F1601 - Horizontal hydraulic arch machine
Characteristics of horizontal hydraulic arch:
Both built different uses and construction, also can arch between the two buildings, you can also in existing upstairs floor, not only solve the waterproof problem and increase the spatial diversity of the design style, strong adaptability, whether it is busy blocks or remote town, aesthetic, economic applicable.
No beam Tan, large space of open, free segmentation combination, easy to use.
Light weight, strong steel, good elasticity, excellent seismic performance.
Diverse architectural styles, combinations available straight trough plates and traditional structure into different forms of any building, alone with countless changes.
Mechanical bite lock, airtight, save time and improve efficiency.
The force method is reasonable, safety, can withstand the wind load and the earthquake
Scientific design concept, advanced construction methods to make the color plate roof structure, the connection is very reasonable and precise, so that the quality of the project is guaranteed.
The architectural appearance is beautiful, diverse
The color plate crown building with bright color, smooth lines, can increase the architectural color, beautify the city scene
The large span roof arch type, shaped like a rainbow, Titaiqingying, give a person a kind of beautiful feeling heart

cold roll forming machine

cold roll forming machine

Technical parameter:
Applicable material: stainless steel, galvanized sheet, color steel plate, aluminum plate thickness: 0.5-3mm
Molding line speed: 3-12 M / min
Production process:
Open book guide – – – – – cut conveying punching molding
Composition of equipment:
1), a uncoiler
2), a set of punching die
3), forming a host
4), hydraulic cut off a set of
5), a set of feeding conveyor
6), PLC electrical control system, a set of
The uncoiler:
01, weight: 2-5T. 02, suitable for steel coil diameter: diameter 480 ~ 510mm.
03, maximum load width: 1000mm.
04, manual book.
The hydropiercing:
01, full automatic hydraulic punching
02, die: the use of high-quality Cr12Mov die steel; quenching after grinding, wire cutting and other fine machining

20141227093035441 300x199 - cold roll forming machine
The forming machine:
01, molding Road: 20 roll forming.
02, roll material: the use of 40Cr quality alloy steel.
03, heat treatment: the hardness of the roller to reach HRC:48-50 degrees.
04, roller processing: after the roller vacuum heat treatment, the use of CAD/CAM integration technology, CNC lathe precision lathe processing, to ensure that the processing accuracy of the roller in 0-0.02mm.
05, fine grinding processing: roller / axis all through the grinding process.
06, Paul processing: all CNC processing.
07, frame structure: the use of high-quality steel welding.
08, the host power: 5.5kW motor.
09, transmission mode: chain transmission; sprocket all by high frequency processing.
10, forming speed: 3-12 M / min.
11, the thickness of the material: less than 3mm.
12, product specifications: according to the drawings.
I cut off:
01, fully automatic hydraulic cutting
02, cutting knife: the use of high-quality Cr12Mov die steel; quenching after grinding, wire cutting and other finishing
The finished product output roller:
Without the power transmission, the standard 2 meters.
The electronic control system
01, control mode: the use of text display, PLC computer control system.
02, inverter: the use of domestic well-known brands.
03, electrical components: the use of domestic high-quality products.

Do you know how to improve the overall quality of the non-standard design?

Do you know how to improve the overall quality of the non-standard design?

On the design of non-standard automation work front we also understand that the a lot of knowledge, the specific design process everybody also understand that but really do design work to understand that some subtle considerations, can effectively improve the design of non-standard automation equipment for the overall quality, below to give you do the introduction.
First the basic content, should is strictly to ensure that the design is no loophole, as we all know because of totally different customer requirements, design all aspects is to start from scratch, design, there will inevitably be some deficiencies, and to improve the quality of the design as a whole, it is best to avoid these problems, the equipment design aspects are taken into account in place, so that we can in the next step to adjust and improve these elements into account, ensure that the final design of the equipment, the quality is excellent
Followed by different designers cannot geese are swans, or the need for mutual communication writing, to share some experience in designing can letting designers, get more experience, in the actual design work, can be as little as possible detours, improve work efficiency, enable us to design more in line with the requirements of the equipment.

IMG 2136 300x225 - Do you know how to improve the overall quality of the non-standard design?
Again is in front of us learned, in order to facilitate the follow-up maintenance and management work, main body structure of the use of electrical appliances, spare parts and other equipment, to maximize the use of standardized things, so equipment design, these content to cover inside, it is recommended in ordinary life, pay attention to the accumulation of different parts of the design, convenient for practical operation, and the work efficiency.
Finally, learning with the use of new high-tech software design or project solution, now the development of science and technology, let a lot of work, become more easily, more obvious see can let designers, in the design, will be able to find deficiencies in the design to facilitate and improve the quality of the work.
Above is the today to learn some knowledge, in fact, many were commonplace, more important is non-standard automation equipment design and manufacturing enterprises to focus on the content and the management efficiency of enterprises.

If you want to know more  color steel roll forming machine , you can contact us with email roofingmachine@zhongtuocn.com

 

Steel Frame Roll Forming Machine

Steel Frame Roll Forming Machine

We offering finest quality Steel Frame Roll Forming Machine to clients. This is the fastest machine on the market. The newly servo drive punch simultaneously advances and punches with accuracy as the material continually moves through the machine. Not only does this considerably increase the speed of the roll forming machine, but also increases the life of the equipment tools.

DSC00511 300x169 - Steel Frame Roll Forming Machine

De coiler 2 ton cap.
Entry Gate with
Roll Forming Line with 9 station, 1 Gear Boxes & 3H.P. electrical.
Control Panel semi auto
Cutting Unit
Technical Specifications : (Plate body)
Maximum sheet width that can be formed : 175mm
Maximum sheet thickness in CRCA Strips that can be formed : 1 mm
Vertical distance between shafts : 80 mm
Horizontal distance between shafts : 175mm
Number of forming stations : 9 nos.
Vertical station : 7 nos.
Total HP for Line : 3(ABB)
Speed of the machine : 4mt/minute
Size of machine : 1600 x 800 x 1100 mm

Cable Tray roll Forming Machine

Cable Tray roll Forming Machine
We are manufacturers and suppliers of Cable Tray Roll Forming Machine. Our all products made from superior quality of raw materials and modern technology. These products are available in various shapes and sizes in the market. These can be availed at very affordable prices.

DSC00424 300x169 - Cable Tray roll Forming Machine
1 Decoiler 1 set
2 Leveling beach 1 set
3 Punching machine 1 set
4 Coil feeder 1 set
5 Roll forming machine 1 set
6 Shearing system 1 set
7 Runout table 1 set
8 PLC control system 1 set
9 Hydraulic station 1 set

If you need this Cable Tray roll Forming Machine you can contact us with email  roofingmachine@zhongtuocn.com

You also can visit oure website http://www.steelroofingmachine.com

Color distinction molding machine hollow shaft and solid shaft

Color distinction molding machine hollow shaft and solid shaft

Many customers asked about calls while the device is always the device uses solid shaft and hollow shaft do not know the difference between, for most customers distinguish solid shaft and hollow shaft is not very clear, can not be sure in the end choose which color materials steel tile equipment, in this small series to share the difference between the color steel equipment hollow shaft and solid shaft with you:

DSC00466 300x169 - Color distinction molding machine hollow shaft and solid shaft
For the first statement solid shaft and hollow shaft We think this is not accurate, it is called, because of the different levels of the business sector will therefore understand equipment is not the same, so the presentation equipment is going to be to some extent caused by the customer not necessary misleading. Before forming the shaft material steel tile equipment is 45 # steel solid round, that is, we are talking about solid shaft, and later by the introduction of some technology south, with thick-walled tube gradually replaces the use of this round, initially the introduction of this technology is mainly on account of the thick-walled tube bending ability is relatively strong, the use of thick-walled tube axis as if forming a bending ability is relatively strong in a number of cost is relatively lower, so now this kind of thick-walled tube color steel equipment in practice is the most commonly used, but many businesses are not very familiar with the principle and use of the equipment itself uses, so with customers to explain all the time for speaking in terms of a solid shaft hollow shaft.

DSC00866 300x169 - Color distinction molding machine hollow shaft and solid shaft
Indeed Color devices used in thick-walled pipe wall thickness is 11mm, the use is not much difference with the solid shaft, the general color steel equipment if pressed color plate thickness below 0.5mm, thick-walled hollow tube with this solid shaft effect is exactly the same, but if the long production 0.8mm color steel manufacturers still recommend the use of such a solid shaft.

Oure cold roll forming machine is the Solid shaft for the color steel roll forming machine and ridge cap roll forming machine.

If you have another need you also can contact us with Email  roofingmachine@zhongtuocn.com

Function steel tile equipment and the correct use of square

Function steel tile equipment and the correct use of square

Steel tile equipment refers to the use of cold-rolled steel plate rolling process on color molding machinery, the main products are: Kok Chi tile press, glazed tile equipment, double glazed equipment, C, Z-beam machine, color steel composite board machine and other mechanical products. Following a brief function steel tile equipment:

IMG 1173 300x225 - Function steel tile equipment and the correct use of square
a, tile press detection section: detecting color steel tile length encoder, pressure-type upper and lower limit switch, upper and lower limit switch cutter, presses down the operation button, the cutter up and down stroke push button, emergency stop switch hydraulic start-stop switch and so on.
b, tile press must use a high number of pulses input function, KDN-K306-24AR the high number of input performance, strong anti-interference ability to choose AB phase. And by setting the interrupt function, to ensure accuracy.
c, PLC selection KDN-K3 series KDN-K306-24AR. It comes with 14 inputs / 10 relay outputs, just to meet the input and output requirements. Coupled KDN text screen, you can complete the parameter setting, alarm display, help information, production data, and so on. Operative tile press have inverter drive motor, hydraulic motor, two-pressure hydraulic solenoid valves, two hydraulic cutter solenoid valves.
Steel tile steel tile press equipment production times is widely used in building materials industry, steel tile for the proper use of equipment, the following pressure-watt Botou City, Mong Machinery Co., Ltd. to find out more about the matter in the course Note:

IMG 1175 225x300 - Function steel tile equipment and the correct use of square
◆ color steel tile press before starting the first inspection equipment, electrical equipment is intact, promptly cut off the power when not in use.
◆ During operation, prohibiting inward depth shovel or other items.
◆ operator when steel tile mechanical inspection to cut off power to ensure safe operating environment.
◆ ensure that each mixing time of not less than 120s, with condiments in proportion, and make a stirring record.
◆ non-operators are not free to operate.
◆ After use, turn off the power in time and clean up the interior, side impact next normal use.

If you want to know more information about the color steel roll forming machine you can visit our main website .

You also can contact us with Email  roofingmachine@zhongtuocn.com

Color machine when choosing color plate thickness factor

Color machine when choosing color plate thickness factor

For color plate devices, at the time of purchase, we often need to hear a word, thickness. This is also purchasing a color plate in question must pay attention to. And for different places, color plate thickness we need are different, for the next time we are in accordance with the scope of application, the scope of procurement color plate thickness, in order to better understand the color plate. Overall performance is getting better. Steel production and processing of high-rise steel structures steel requires a good weldability or low crack susceptibility; seismic aspects of the requirements of steel with good toughness and impact energy absorption capability; fire-resistant steel with good aspect requires a delay at a high temperature , generally requires 600 ℃, the yield strength of not less than two-thirds of normal temperature and the like.

Fully automatic roofing sheet making machine 1 300x192 - Color machine when choosing color plate thickness factor
For the roof is, if we use color steel roof as recommended is the choice of 0.8 or more color plate, so that more good, this number, the width of the roof color plate should be as small as possible, so that drainage can also be very convenience. As for the walls, the color steel machinery we propose to use a thickness of less than 0.8 color plate, in addition, the width of the wall also preferably bigger the better, because for the wall, the lower the crest, it looks more for the aesthetic point. This will be more practical.

Fully automatic roofing sheet making machine 2 300x234 - Color machine when choosing color plate thickness factor

Production process more and more compact layout. In the face of the increasingly demanding requirements of the steel structure of steel, it is also faced with resource conservation and cost reduction pressures, steel steel production must therefore take the low-cost, high-performance routing. To this end, the world revolves around the rolling process and rolling technology innovation, has developed a hot-rolled → quenching and tempering (offline) → TMCP (thermo-mechanical controlled rolling) and QST (quenching and self-tempering) new process. Strength increasing. With high-rise building structures, high-rise and large span of development, construction steel is steel to strengthen the development of high. Therefore, the extensive use of high-strength steel construction has become a trend in today’s world of building structures.

 

Arc roof tile forming machine

Arc Roofing Tile Forming Machine
The series production process flow of the art roof tile forming machine is Decoiling→Feeding & Guiding→Roll Forming→Step pressing→Cutting→Finished Products to Support Table.

arc roof tile forming machine 300x81 - Arc roof tile forming machine

 

The production by the machine are widely used all kinds offactories,houses,warehouses,and simple steel shed with beautiful appearance , high efficiency and reliable working.It consists of feeding platform,main molding core,shearing mechanism,hydraulic station,computer control cabinet,high precision counter and so on.

Detailed components introduction
1. Manual Decoiler of the corrugated arc roof tile steel panel roll forming machine
1): coil inner diameter: 450-550mm
2): coil max width: 1250mm
3): max carrying capacity: 5000kg
Usage: It is used to support the steel coil and uncoil it in a turnable way.
Passive uncoil pulled by roll forming system

arc roof tile forming machine 1 300x300 - Arc roof tile forming machine

 

2. Coil feeding part of the corrugated arc roof tile steel panel roll forming machine
Usage: Put the raw material(steel plate) through the beach to manufacture and process, it can guarantee that the products are neat, parallel and everything is uniformity.
Please refer to the equipment regulation to know the function of locate angle iron.

arc roof tile forming machine 2 300x101 - Arc roof tile forming machine

 

3. Main roll forming machine part of the corrugated arc roof tile steel panel roll forming machine
1).roller material: 45# steel with hot treatment at 52-68 degrees, hot chormed on the surface to make sure its hardness.
shaft material: solid shaft(not hollow style), around 70kg/pc, to make sure the strength of it.and final profile shape are perfect in this way.
Shaft diameter: normally is 72mm.
2).power: normally 7kw in total
3).transmission model: gear and chain
4).controlling model: PLC controlling system, fully automatic.
5).Forming speed: 0-17m/min
Usage: In order to keep the product shape and precision, adopts welded sheet structure, motor reducer drive, chain transmission,roller was chromed which can keep the molding plate surface smooth and not easy to be marked when it is working

arc roof tile forming machine 3 300x193 - Arc roof tile forming machine

4. Automatic cuttting system of the corrugated arc roof tile steel panel roll forming machine
1).Material: blade, puncher and mold material: Cr12steel with quenched treated 60-62
2).Cutting system: advanced hydraulic drive, automatic cutting after forming, no distorting or wasting, high level safety factor.
It adopts the hydraulic drive and automatic encoder to cut the accurate length you set on the computer.The tolerance is within 10m±1mm
Material of blades: Cr12 quenched
Power supply: hydraulic power
Components: It contains one set of blade, one hydraulic tank and one cutter machine

arc roof tile forming machine 4 300x219 - Arc roof tile forming machine

 

5. Computer controlling part of corrugated arc roof tile steel panel roll forming machine
1).PLC brand: Normally, it is Delta. Mistubishi, Panasonic, Siemens are optional.
2).working model: fully automatic and manaul
3).working language: normally are English, Chinese, Russia. Can be set as per your requirements.
6. Hydraulic station of the corrugated arc roof tile steel panel roll forming machine
1).including one motor,one oil tank,one magnetic valve,one pressure gage, hydraulic oil tube
2).3kw, 4kw, 5.5kw, will be adopted as per your profile sheet.

arc roof tile forming machine 5 300x265 - Arc roof tile forming machine

Use Common Problems tile press

Use Common Problems tile press

The solution is to replace the impeller on the machine or sanding, we recommend the first method of comparison, and then impeller obstructions removed, we can solve the problem. Providing tile press common problems and solutions, it is a professional tile press common problems and solutions provider.
Tile press more and more important in the construction of the above buildings, cottage construction, building construction, construction of various buildings are inseparable from it. However, due to relatively easy solutions tile press caused by wear and tear, so there is always this or that problem to affect the normal production and manufacturing, so let’s introduce its recurring problems and problems after

IMG 0807 300x200 - Use Common Problems tile press
1, the machine swinging too big reason: Since the digging wheel wear is more wear and tear the place to be, so they would often wear a serious problem, if there is a serious problem of wear, it will cause impeller for obstructions .
2, idle too much resistance causes: material bearing on the inner seal having clogged Solution: The material bearing on the clog out, while checking whether there is a corresponding device material clogging.
3, bearing fever reasons: lack of oil bearing, bearing a fine entry, bearing damage Workaround: bearing lubrication, cleaning bearings or replace bearings.

IMG 0810 300x200 - Use Common Problems tile press
4, the expected product size is too large Cause: The belt is too loose, the nesting population adjustment unreasonable, impeller speed and other issues will affect the quality of the product, so we have to put the particles in a uniform quality of the product to get the raw material stirring time, so after the brick next step only after the proper particle density in order to achieve appropriate standards. Solution: Check the V-belt tension state to regulate the discharge port, the impeller speed, until the desired standard, use Notepad to record speed range to facilitate the proper use of the next.

If you need this type machine you can contact us with email   roofingmachine@zhongtuocn.com