Automatic tile press Architectural Overview

Automatic tile press Architectural Overview

It consists of the left and right of the body, the bottom of the link, at the top of the chassis cover, consisting of a sliding seat, hexagonal wheel, pulleys, gears, sheave mechanism, cam mechanism, lubrication pumps, hydraulic system, electric control part. The aircraft die stamping process: After the motor pulley to drive the input shaft, the pinion gear, drive shaft, drive up and down movement of the slide base mounted on the mold through a cam mechanism to achieve press shoe.

IMG 1174 225x300 - Automatic tile press Architectural Overview
Automatic tile press Maintenance
Do not understand the structure and performance of the machine and procedures shall not start the machine. Shall not exceed the minimum shut height to work, that work on the sliding surface to the bottom surface of each of the upper and lower height requirements for minimum distance 290㎜ after mold clamping, plus, plus upper and lower plate thick crust thickness of the tiles, must not exceed 290㎜, manufacturing mold this requirement should be designed to avoid the machine accidents. Often observe, the height of the box and slide on both sides of the body lubricant. Equipment should always be clean, clean, not allowed to have water dirt

We have the color steel roll forming machine and double layer roll forming machine ,If you need this machine you can contact us with email

This artical is introduce the Automatic tile press Architectural Overview

Leave a Reply

Your email address will not be published. Required fields are marked *