Trapezoidal roof sheet roll forming machine

The metal trapezoidal roof is widely used for steel structure building, steel structure project, and containment system. Different roof panel machines can produce different shapes of steel roof, wall sheets according to the clients’ profile drawings and requirements. Steel roof, wall sheets are new building materials with various thickness and colors. The following information is about trapezoidal roof sheet roll forming machine.

The profile drawings and finished products of trapezoidal roof sheet

drawing profile of roof and wall cladding 300x271 - Trapezoidal roof sheet roll forming machinefinisehd product of roof and wall cladding 300x300 - Trapezoidal roof sheet roll forming machine

Features of trapezoidal roof sheet

1.Economic sheeting in a robust profile

2.Light in weight

3.Fast and easy to fit

4.Available in range of traditional colours

Composition of Trapezoidal Roof Sheet Roll Forming Machine

Roll forming main machine……………………………1 unit
Automatic decoiler…………………………………… 1 unit
Control device……………………………………………1 unit
Hydraulic cutting system………………………………1 unit
Auto stacker……………………… ……………………1 unit

Parameters of trapezoidal roof sheet roll forming machine

 Length of the main part  8500 * 1650 * 1450 mm
 Weight of main part  5.5 t
 Voltage  380 V/ 50 HZ 3 Phase (as customer’s request)
 Roller fixer  Middle plate welded
 Frame  350 H steel welded
 Frame thickness  20 mm
 Drive mode  Double Chain
 Material of rollers  45# steel, surface hard chromium plating.
 Material of shafts  45# steel
 Diameter of shafts  Φ 70mm
 Number of rollers  15 rollers
 Main power  4 kw
 Hydraulic power  3 kw
 Cutting type  Hydraulic cutting(without waste)

roof and wall cladding roll forming machine 300x300 - Trapezoidal roof sheet roll forming machineIBR roof panel machine 300x300 - Trapezoidal roof sheet roll forming machine

Roof roll forming machine

Roof roll forming machines are widely used to produce metal roofing and wall cladding sheets, and the most popular roof roll forming machines in the markets can be found here. We design a roof roll forming machine to produce roof panels, roofing step tiles and wall cladding sheets with different models, like IBR roofing sheets,round wave panel,  trapezoidal roof panels etc. The whole roof roll forming machine line is including decoiler, roll forming machine, electric controller and run out table.

Take some drawing profiles and finished products for your reference

drawing profile of double layer machine - Roof roll forming machinedrawing profile of color roofing tiles 288x300 - Roof roll forming machine

Some pictures of roof roll forming machine

double layer roll forming machine 副本 300x300 - Roof roll forming machineglazed tile roofing sheet machine 副本 300x290 - Roof roll forming machine

Features of roof roll forming machine

  • Simple structure, good appearance since the whole machine is used profiled steel structure. And wholly manufacturing after welding, in order to make it running stable and reliable.
  • Completely automatic cutting, accurate length, and position trim cutting for the rear of profile sheets, no deformation.
  • Easy installation, good performance for manufacturing in the factory.
  • Low noise, high efficiency.

Components of production line

No. Name Unit Qty
1 Hydraulic decoiler set 1
2 Main forming machine set 1
3 PLC control system set 1
4 Hydraulic pump station set 1
5 Post cut set 1
6 Electric motor Semen set 1
7 Output table set 1

If you want to know more detail information about the roof roll forming machine, please feel free to contact with us at any time. We will provide the suitable solution to meet your requirements. What’s more, we will provide the 7/24 seervice to solve your problems in time. If you have time, please come to visit our factory at any time.

Trapezoidal shape metal roofing sheet making machine

Trapezoidal shape metal roofing sheet making machine is widely used in the construction of various industrial plants, villages, warehouses, supermarkets, hotels, exhibition, family construction, shopping malls shutter doors and etc. It has the advantage of beautiful, classical appearance and grace taste.

There are some finished products and drawing profile

trapezoidal shape metal roofing sheet 300x161 - Trapezoidal shape metal roofing sheet making machinefinisehd product of roof and wall cladding 300x300 - Trapezoidal shape metal roofing sheet making machine

Features of trapezoidal shape metal roofing sheet

1. Light weight: 10-14 kg / square meter, equivalent to 1 / 30 of the brick wall.
2. Thermal conductivity: λ<=0.041w/mk.
3. High strength: It can be used as a load-bearing structure for ceilings, and it can resist bending and compression; general houses do not use beams and columns.
4. Bright color: no need for surface decoration, color galvanized steel anti-corrosion layer is maintained for 10-15 years.
5. Flexible and quick installation: the construction period can be shortened by more than 40%.

Parameters of trapezoidal shape metal roofing sheet roll forming machine

Guiding device Placed on the machine by seller
Rolling shaft material 45# STEEL
Shaft diameter 80 mm
Roller material 45# steel
Rolling station 15 stations for upper roof sheet
Work speed 15 m/min
Machine structure Steel plated welded
Machine basic frame Steel plate welded
Bearing Roller bearing
Roller spacer treatment Electroplate
Steel bar treatment Electroplate
Work power 7.5 kw
Transmission By Chains
Safety cover Include with the machine
Pre-cutter include Electrical cutter

Here is a video of trapezoidal shape metal roofing sheet roll forming machine

Roofing tile roll forming machine

The roofing tile products are formed by cold roll forming machine from high quality coated sheet, which performs the elegant style of traditional roof tile and suits for every architecture design. With light, strong strength and long lasting quality, it is convenient and takes short time for installation. To meet different requirements from customers, we design the different roofing tile roll forming machine for your choose.

Check the drawing profile

Features:Reliable, Durable, Sturdy construction

roofing tile 300x150 - Roofing tile roll forming machine

These are used in construction industries for developing roofs and are highly acclaimed among our customers due to their trouble free performance and high durability.We also assure to deliver a quality tested array of our products after checking their quality under rigorous parameters. We offer these products at industry-leading prices to our valuable clients.

Parameters of roofing tile roll forming machine

Processing material: colored steel plate, galvanized plate, or aluminum plate

Material thickness: 0.3-0.8 mm

Material hardness: 245 mpa—350 mpa

No.                    Main parameter
1  Length of the main part  8500 х 1650 х 1450 mm
2  Weight of main part  5.5 t
3  Voltage  380 V/ 50 HZ 3 Phase (as customer’s request)
4  Roller fixer  Middle plate welded
5  Frame  350 H steel welded
6  Frame thickness  18 mm
7  Drive mode  Chain
8  Material of rollers  45# steel, surface hard chromium plating.
9  Material of shafts  45# steel
10  Diameter of shafts  Φ 90 mm
11  Number of rollers  20 rollers
12  Main power  11.5 kw

Here is a machine video for your reference

Glazed roof tile for building

Glazed roof tile has become a popular building material. It is made of high-quality ore raw materials, which are screened and pulverized, high-pressure molded and fired at high temperature. It has the advantages of high strength, good flatness, low water absorption, anti-folding, anti-freezing, acid resistance, alkali resistance, never fading, and so on. It is widely used in industrial and civil buildings such as factories, houses, hotels, villas, etc., and its styling is diverse, glazed, simple, colorful, environmentally friendly and durable, and won the respect of architectural masters. It is also has many characters to meet the different requirements. We also can customize the glazed roof tile making machine according to your real needs.

Some types glazed roof tile

tile drawing profile 288x300 - Glazed roof tile for building

Features of glazed roof tile

fireproof, waterproof, environmental protection and no toxicity, at the same time it is resistant against acid, alkali and aging. This product can be nailed,  planed, sawed and sticked. In view of that its fireproofing grade is A, so our product will not be combustible when  the fire is 800-1000°C. At the same time, when our product is fell into the water for a week, there are not the following phenomenon such as chalking, deformation and warp. In light of there is not glue in the raw materials,  so there is not formaldehyde and benzene for our boards.Rich color and never fading.

 

The advantages of floor decking

The floor decking is widely used in building construction and the construction of infrastructure. It is economical and affordable. So what is the floor decking? The floor decking(steel decking, building profiled steel plate) is formed by rolling cold-formed galvanized steel sheet. Its cross section is V-shaped, U-shaped, trapezoidal or the others. It is mainly used as a permanent template, can also be selected for other purposes.

750 floor deck 300x224 - The advantages of floor decking

floor deck 300x98 - The advantages of floor decking

The advantages of floor decking

1: Adapt to the requirements of rapid construction of the main steel structure, it can provide a firm working platform in a short time. And can use multiple floors to lay the profiled steel plate and layer the concrete flow.

2: In the use stage, the floor slab is used as the tensile reinforcement of the concrete slab, which also increases the rigidity of the slab and saves the amount of steel and concrete.

3: The embossing on the surface of the profiled board creates a large bonding force between the floor slab and the concrete. So that the two form a whole, with stiffeners, so that the floor slab system has high strength bearing capacity.

4: Under cantilever conditions, the floor slab is only used as a permanent template. The length of the cantilever can be determined according to the section characteristics of the floor panel. In order to prevent the cracking of the cantilever plate, it is necessary to match the design of the structural engineer with the negative reinforcement at the support.

Here is a video of the flloor deck roll forming machine

Corrugated metal roofing sheet

The signature shape of corrugated metal roofing sheet is the key to its durable, yet lightweight, characteristics which make it the perfect choice for many construction projects. This special corrugated shape adds strength to lightweight materials. This means that a lightweight metal like aluminum, which may otherwise be too flimsy, can be made sturdy enough to withhold years of beating in all kinds of weather.

Roof and Wall Corrugated Shee52 1 300x99 - Corrugated metal roofing sheet

Roof and Wall Corrugated Shee 1 300x164 - Corrugated metal roofing sheet

While commercial, industrial, and farming settings are using this type of roofing. But residential homeowners have recently increased the demand for the product. Additional improvements such as galvanized metal, which protects it against corrosion and rust, has allowed this sheet metal roofing to evolve from a limited material into one of the most sought-after roofing materials available.

Characteristics of Corrugated Metal Roofing Sheet

With all the properties that metals have, it is not uncommon for a metal roof to last for up to 100 years. It would make sense that a roof of this material would be able to withstand extreme weather conditions. Such as heat waves, snowstorms, hurricanes, and even hail storms. The most modern galvanized metal roofing also has fire resistant properties. And contrary to popular belief, is your safest option in areas where lightning strikes are common.

Those who are concerned with being environmentally friendly would be happy to know that corrugated roofing is completely recyclable. In warmer climates, metal roofing reflects the sun and reduces air-conditioning bills. While in cooler climates it can warm underlying areas. Its lightweight build reduces stress on the underlying walls of buildings, and so doesn’t require much structural support. When installed properly, leaks should never be a problem like they are with traditional roofing shingles.

Metcopo roll forming machine

The metcopo roll forming machine is a wide using forming line to produce house roofing, the panel for roof looks beautiful. And machine can get a max production capacity for one specific shape. Our machine max speed can be 8m/min, this is 2 times of normal machine.

Check some drawing profile

tile drawing profile 288x300 - Metcopo roll forming machine

The patameters of metcopo roll forming machine

Decoiler

It is for hold and feeding the coil to roll forming machine, there have different choices according to different purpose or cost.

Roll forming machine

 

 

No.                    Main parameter
1  Length of the main part  8500 х 1650 х 1450 mm
2  Weight of main part  5.5 t
3  Voltage  380 V/ 50 HZ 3 Phase (as customer’s request)
4  Roller fixer  Middle plate welded
5  Frame  350 H steel welded
6  Frame thickness  18 mm
7  Drive mode  Chain
8  Material of rollers  45# steel, surface hard chromium plating.
9  Material of shafts  45# steel
10  Diameter of shafts  Φ 90 mm
11  Number of rollers  20 rollers
12  Main power  11.5 kw

Control

1.Adopted PLC, transducer, touch panel from Delta Taiwan to ensure high speed with

stability, precision and lifetime.

2.Other electric element are Delta

3.Equipped with movable switch, air break, radiator, transformer & electric leakage protector for operation convenience and safety.

Product Supporter

To support or collect finished panel, and have different devices. Even without the supporter, panel can cut and drop on ground will also work well.

Optional Accessories

• Coil Car

• Pre-cutter

• Safety cover

glazed tile roofing sheet machine 副本 300x290 - Metcopo roll forming machine

C8 and C21 roof sheet making machine

C8 and C21 profiles both are popular roof sheet in Russian. These two profiles can be make by one double layer roofing sheet machine. In the following, i will show you more details information about C8 and C21 roof sheet making machine.

The drawing profile of C8 and C21 roof sheet

C8 and C21 profile 279x300 - C8 and C21 roof sheet making machine

The process flow of C8 and C21 roof sheet machine

Decoiling–feeding—forming—cutting—production

The parameters of C8 and C21 roof sheet making machine

Manual decoiler

1).Inside diameter coil is 500 – 600 mm

2).Coil Width is 1200mm

3).Coil load 7ton

5T manual decoiler 副本 300x232 - C8 and C21 roof sheet making machine

Main forming system

1).Number of forming roller step:c8/13steps   c21/17steps

2).Shaft material: 45# steel, outer diameter 80mm

3).Roller material:#45 steel

4) Chains transport

5) Forming speed:10 -15 mmin

6) Main motor power: 7.5 kw

7) Dimension:9.2m*1.65m*1.5m

8) Similar machine photo for your reference

C8 and C21 roof sheet making machine 300x225 - C8 and C21 roof sheet making machine

Hydraulic Cutting device

1) Hydraulic Station:1set

2) With hydraulic station, motor 3 KW

3) Cutting press 20 ton:20T

4) Hydraulic cutter

5) Blade, puncher and mold material: Gcr12 steel with quenched treated 60-62℃

6) Cutting system: advanced hydraulic drive, automatic cutting after

forming, no distorting or wasting, high level safety factor.

Controlling Device

1) Screen: 5.7 inch Delta screen

2) PLC: Delta

3) Automatic length measurement

4) Automatic quantity measurement

5) Computer is used to control length and quantity. Machine will automatically cut to length and stop when required quantity is achieved

6) Length inaccuracy can be amended easily

 

C10 type roof panel making machine

C10 type roof panel making machine has reasinable structure, beautiful appearance, with advantage of saving space, easy operate and especially welcomed by the costomer with limit area or site operation. There are some details about the machine in the followings.

The drawing prfile of the C10 type roof panel

C10 roof panel 300x122 - C10 type roof panel making machine

The parameters of C10 type roof panel making machine

Manual   decoiler

1).Inside diameter coil is 450 – 550 mm

2).Coil Width is 1250 mm

3) .Coil load 5 ton

5T manual decoiler 副本 300x232 - C10 type roof panel making machine

Main machine system

1).Number of forming roller step 13 steps

  • .Shaft material: 45# steel, outer diameter 80mm
  • .Roller material:#45 steel
  • .Chains transport
  • .Forming speed:8-10m/min
  • .Main motor power:5.5kw
  • .Size:6.2m*1.65m*1.25m
  • .Weight:3.5T
  • .Voltage:415v,50Hz,3 phase
  • .Test material:PPGI,GI
  • .Similar machine photo for your reference

C10 type roof panel making machine 300x225 - C10 type roof panel making machine

Hydraulic Cutting device

1) Hydraulic Station:1set

2) With hydraulic station, motor 3 KW

3)Cutting press 20 ton

4)Hydraulic cutter

5)Blade, puncher and mold material: Gcr12 steel with quenched treated 58-62℃

6)Cutting system: advanced hydraulic drive, automatic cutting after forming, no distorting or wasting, high level safety factor.

Controlling Device

1) Screen: 5.7 inch Touch screen

2) PLC: Delta

3) Automatic length measurement

4) Automatic quantity measurement

5) Computer is used to control length and quantity. Machine will automatically cut to length and stop when required quantity is achieved

6) Length inaccuracy can be amended easily