Double Layer Steel Tile Roofing Roll Forming Machine

Double Layer Steel Tile Roofing Roll Forming Machine

Products Feature:

1. A stylish and attractive design, giving the appearance of a traditional roof tile.
2. Resistant to frost, heat, hail and gales; 100% waterproof, due to the lateral run-off channel on each sheet for several models.
3. The raw material can be in different color, with elegant and noble looking. It is widely used as the garden like factory, hotel, exhibition, villa, civil construction etc.
5.5kw Main Power Color Steel Roofing Sheet Tile Roll Forming Machine
1.Forming Tile Show:

20170806205358 - Double Layer Steel Tile Roofing Roll Forming Machine
2.Producing Process Show:

20170806205412 - Double Layer Steel Tile Roofing Roll Forming Machine

Main Forming Machine Technical Pamameter:

machine size 7600mm*1600mm*1500mm
Feeding width 1000mm
Equipment weight 3.5T
Material of shaft 45#steel adjustable treatment
Out diameter of shaft φ70mm
Material of roller Cr12, quenched treatment HRC58-60°C
Number of forming rollers Down for 840: 13 rows

Up for 850:10 rows

Main frame 300 H steel
Thickness of medium plate 16mm
Transportation system Chain transportation
Thickness of chain 1 inch
Main motor power 3 KW
Bearing 6213
Gear box 150*150
Forming speed 8-12m/min
Rolling thickness 0.3-0.8mm

20170806205306 - Double Layer Steel Tile Roofing Roll Forming Machine

Hydraulic Shearing System:

Material of blade Cr12,heat treatment 60-62°C
Shearing system It is controlled by gear wheel oil pump. After filling the hydraulic oil into the hydraulic oil tank, the pumps drive the cutter machine to begin the cutting job.

The system includes a set of hydraulic tank, a set of hydraulic oil pump, two hydraulic pipes. And two sets of electromagnetism valves.

Power of the oil pump: 4kw

Hydraulic oil :40#

Electrical System:

Screen display 5.7 inches touch screen
Main computer control cabinet It adopts industrial computer to control. The target piece’s length is adjustable and digit of it can be adjusted. Computed mode has two modes: automatic and manual one. The system is easy to operate and use.

Processing precision : within 1.00mm

It contains liquid crystal screen, programmer, transformer for the electronic machines and kits of every part.

Transducer brand is TaiWan”taida”

The seller should provide Chinese and English language screen.

commercial roofing materials roll forming machine

commercial roofing materials roll forming machine

A, Main technical parameter

Specification of roll 1000mm
Roll speed 8-12m/min
Roll steps 14
Main motor power 4KW
Dimension of product 7800mm*1400mm*1000mm
Material of rolling round Steel 45#
Material and Diameter of bearing Steel 45#,70mm
Weight of product 5.5T
Material thickness 0.4-0.8mm
Model of bearing 210
Mode of cutting Hydraulic cutting
Material of scissors Cr12
Hydraulic station power 3Kw
Computer cabinet size 700mm*1000mm*300m
PLC, Dynamic currency device Japan Panasonic

a654b98fc5 - commercial roofing materials roll forming machine

B, Main Parts

This machine is composed of manual  decoiler, transmission device, main roll forming machine, stamping device, PLC control system, hydraulic shear

Un-coiler deck 1 set
Guiding&leveling device 1 set
roll forming machine 1 set
Punching device 1 set
Cut to length device 1 set
Run out table 1 set

Color Steel Wave Roof Panel Roll Forming Machine

Color Steel Wave Roof Panel Roll Forming Machine

Brief introduction:

The roll forming machines can produce various of steel roof and wall panel. Meanwhile it is a new building materials, the products are widely used as the roof and wall of factory, warehouse, garage, gymnasium, exhibition center, cinema, theatre, etc. It has many advantages, such as easy installation, short building period, beauty, light weight but high strength.
The chart of Process Flow and components
Manual uncoiler- Roll forming machine- Computer control system- Hydraulic control system- Form cutter

Advantages of the roofing sheet roll forming machine

1. High efficiency
2. Lower cost
3. Long life time: 30years
4. Low energy consumption
5. PLC control, Panasonic or Siemens or eura
6. Easy operation
7. Beautiful and best quality

IMG 4158 thumb - Color Steel Wave Roof Panel Roll Forming Machine

Parameters of the Machine:

1. Suitable material: Color steel plate, Galvanized Board, Aluminum Plate, etc.
2. Suitable thickness: 0.3-0.8mm or other thickness
3. Forming specifications: Depending on specific requirements of customers
4. Forming speed: 15-20m/min
5. Main motor power: 4Kw (depending on specific requirements of users)
6. Cutting mode: Hydraulic cutting
7. Hydraulic station power: 4Kw (depending on specific requirements of users)
8. Control system: PLC systems from Mitsubishi, Schneider and Panasonic products, electrical appliances of famous brands
9. Way of drive: One inch chain
10. Optional accessories: Hydraulic uncoiler.
11. Material of roller: High grade 45# forged steel plated with hard chrome plating

No. main parameter of glazed tile forming machine
1 Suitable to process Color steel plate, Galvanized Board, Aluminum Plate
2 Width of the plate 1250mm
3 Rollers  12 rows
4 size 6.12*1.5*1.5m
5 Main moter power 4kw
6 Hydraulic unit power 4kw
7 Thickness of the plate 0.3-0.7mm
8 Productivity 15-20m/min
9 Diameter of the roller Φ70mm
10 Voltage 380V 50Hz 3phases
11 Main frame 300mmH steel
12 Material of the cutting plate Cr12
15 Control system PLC Frequency ControlSystem with touch screen

Floor Decking Tile Press Roll Forming Machine

Floor Decking Tile Press Roll Forming Machine

1. Hydraulic Un-coiler

Width of raw material: 1250mm
Max Capacity: 10000kgs
Max out diameter of coil: 1800mm
Inner diameter of coil: 500-600mm
Hydraulic feed and brake

2. Shearing Device

Shearing way: Manual
The material of blade: Cr12 with Heat treatment HRC60-62
c60 floor decking panel machines - Floor Decking Tile Press Roll Forming Machine

3. Main Forming System

Feeding width: 1219mm
Product width: 1000mm
Height of waves: 50mm
Thickness of sheet: 0.8-1.2mm
Material: GI sheet coil
Roller stations: 30 rows
Material of Roller: Cr12
Surface of Roller: Hard Chrome plating and High-frequency treatment
Diameter of main shaft: 90mm C45steel, modulation
Thickness of Shell frame: 30mm
Main Bearings: 60311
Power of main motor: 11kw, with speed reducer.
Forming Speed: 3-12m

4. Cutting device

Oil pump station 1set
Motor power of Oil pump station: 5.5kw
Forced air cooling device available
Cutting mould: 1set
Material of blade: CR12 with heat treatment HRC60-62
Pressure of cutting: 20 tons.

5. Run-out Table

Frame: 8# steel groove welded
Length: 3m
Quantity: 4 pcs

6. Electrical System

PLC and HMI touch Screen (Taiwan Delta or Siemens)
Automatic length measurement
Automatic quantity measurement
Length measurement: Rotary Encoder
Over current protection for control system, aviation plugs
Cutting off type: Paused to cut, moving automatically after cutting.
Power: 380V 60Hz

Advantage of our deck floor roll forming machine
High quality
Lower cost
Durableness
High efficiency
Reliable working
Low failure rate
Low energy consumption
Trouble free after sales service

New Corrugated Metal Steel Roof Panel Roll Forming Machine

New Corrugated Metal Steel Roof Panel Roll Forming Machine

Advantage of our roll forming machine machine
High quality
Lower cost
Durableness
High efficiency
Reliable working
Low failure rate
Low energy consumption
Trouble free after sales service

The advantages of the double deck roll forming machine

1. High efficiency
2. Lower cost
3. Long life time: 30years
4. Low energy consumption
5. PLC computer control
6. No noise, no shake

Machine parameters of roll forming machine

Other spec.
1. Size: about 6*1.5*1.6m (L*W*H)
2. Weight: About 3.5 ton
3. Decoiler Max. Capacity: 5000kgs
4. Hydraulic station power: About 4Kw (Depend on final design)
5. Cutting length: Cut-to-length

Roofing Tile Roll Forming Machine - New Corrugated Metal Steel Roof Panel Roll Forming Machine

metal roof roll forming machine for sale

metal roof roll forming machine for sale

1. The main technical parameters of mechanical parts:
1) Forming method: sequence and synchronous deformation mode (first to form the middle of the stiffener to force the release to both sides to ensure the shape of the plate after the effect)
2) Molding number: 16
3) forming roll bar material: forged 45 # steel
4) forming roller mold: CNC finishing process
5) Roller surface hardened single-sided: 0.05 mm
6) forming spindle diameter: Ф75mm solid shaft material 40R quenched and heat treated
7) The main motor power: 50HZ / 380V / 7.5KW
8) hydraulic station motor power: 50HZ / 380V / 3KW
9) hydraulic station motor power: 50HZ / 380V / 3KW
10) Forming scissors blade material: Cr12 die steel after heat treatment hardness HRC60 ° — 62 ° (Wuxi South heat treatment process)
11) moulddiasystem thickness: 0.4–0.5mm
12) Molding speed: 5 m / min
13) Board type waterproof performance Good board flat, no abrasion. The specific size of the board conforms to the international construction industry using the plate GB / T12755-91

IMG 4158 1 - metal roof roll forming machine for sale
2. Equipment, electrical control system part of the process
1) The length of the product length method: (2500 rotary encoder pulse tracking scale) error of 10m ± 1mm
2) Control System Inverter: 7.5KWhuichuan control series of safe, stable and reliable performance
3) The control system procedure uses the industrial computer German Simens PLC programming system
4) Operator Panel: Man-machine interface touch-screen robot dynamic equipment simulation process monitoring process
3. The complete process flow chart of the equipment is as follows:
10T Passive Unwinding Feeding — Feeding — Sequential Roll Forming — PLC Computerized Cutting — Hydraulic Mold Auto Cutting — Finished Material Discharging
4. A full set of equipment process characteristics
4.1 10T passive decoiler
1) 10T passive uncoiler machine using cantilevered umbrella-type material rack, through the screw to adjust the tightening, can be suitable for different size of the color of the coil volume, loading convenience.
2) decoiler power for the passive, linear speed with the host changes.
4.2 The molding process characteristics of the main frame
1) The main frame of the equipment adopts 36 # GB hot-rolled I-beam, the whole welding after the use of shot blasting vibration method to welding stress, the frame structure through the gantry mill finishing. Wall plate and rack connection Screw connection way to reduce the amount of deformation of the rack to ensure the level of the horizontal and vertical horizontal cross-frame and steel, and extend the service life of the equipment.
2) Spindle all use high-quality 40R steel quenched and tempered solid shaft CNC finishing to ensure that it has a good overall performance
3) Roll 45 high-quality forged steel after finishing the surface of the process of slow-plated hard baked treatment, with good dimensional accuracy and wear resistance
4) The host uses the cycloid pin wheel slows down the electrical machinery actuation, each active roller uses the chain type transmission, smooth is reliable
5) The machine uses the molding hydraulic mold technology, hydraulic drive, safe and reliable action, to ensure that the profile before and after the end and the middle part of the effective width of the same.
6) The cutting tool material is Cr12 mold steel, after heat treatment, the hardness reaches HRC60 ° — 62 °
FAQ
1)Q:Can you make machine according to my design?
A:Yes, we have experienced technical team to work out the suitable design for you and confirm with you until you agree.
2) Q: Will you deliver the right goods as ordered? How can I trust you?
A: Yes, we will. The core of our company culture is honesty and credit.
3)Q:What payment terms you accept?
A:Commonly is TT, 30% deposit and 70% before shipment, and sometimes we can consider more for you as per your request.
4) Q:What is the warranty for our machine?
A:We have one year guarantee, and provide whole life’s technical support.

Double Layers Roll Forming Machine

Description of 2 Layer roll forming machine:
Double layers roll forming machine can be used to produce 2 different profiles of corrugated steel sheet, it can be customized at clients actual need. Double layers can make up by glazed tile and single sheet or two layers can make up by single sheet and single sheet. In addition, customer can choose pressing and cutting style — guide pillar type or welded steel plate style.

There are some pictures for you to reference:

22 - Double Layers Roll Forming Machine2 - Double Layers Roll Forming Machine3 - Double Layers Roll Forming Machine

The Process  flow of the machine:

Decoiling–feeding—forming—cutting—production

Here is some brief introduction of each element:

1. Manual decoiler

(1)material coil inner diameter: 450-550mm

(2)max coil width: 1250mm

(3)carrying capacity: 5000kg

2.Forming device

(1) Shaft material: 45# steel, outer diameter 80mm

(2)  Roller material:45# steel

(3) Number of roller step: Up layer: 13 steps     Down layer: 15 steps

(4)  Chains transport

(5)  Forming speed:8–10m/min

(5) Main motor power: 7.5kw

(7)  350#H style steel welded stand

(8) Chromium plated roller surface 0.05mm

(9)  Machine’s weight and out size: 7.5Tons, 8.2*1.6* 1.7M(L*W*H)

(10)  Voltage:380v 50hz 3-phase

3.Cutting device

(1) Hydraulic Station:1set

(2) With hydraulic station, motor 4 KW

(3) Cutting press 20 ton

(4) Hydraulic cutter

(5) Blade, puncher and mold material: G12 steel with quenched treated 60-62℃

(6)Cutting system: advanced hydraulic drive, automatic cutting after

forming, no distorting or wasting, high level safety factor.

(7)Tolerance of cutting length:±1mm

4.Controlling device

(1) Screen: Text Screen

(2) PLC: Panasonic

(3)Automatic length measurement

(4)Automatic quantity measurement

(5)Computer is used to control length and quantity. Machine will automatically cut to length and stop when required quantity is achieved

(6) Length inaccuracy can be amended easily

If you want to know more infomation, please feel free to contact us at any time.

Roofing panel machine

The roofing panel machine is rolled or cold-rolled strip steel, metal plate, galvanized plate, color steel as raw materials. Light metal profiles of different section shapes are obtained by bending at room temperature.  There are many types roofing panels used in houses, offices, warehouses,  workshops and cars panel.

The main body of roofing panel machine without welding, all the use of cast steel, the whole machine will not produce stress and lead to the host body deformation.

11 1 - Roofing panel machine

High quality rollers of roofing panel machine can produce not only beautiful but also high quality profile. That will satisfy your customers. And its working process is so easy to learn.

liuchengtu - Roofing panel machine

Features of roofing panel machine:

1.Take advanced method to make sure machine quality.
2.More options to make different types roofing sheet.
3.Smart machine and economical option.
4.Long time to us.

 

Floor Decking Cold Steel Forming Machinery

Floor Decking Cold Steel Forming Machinery

Floor deck are widely used in building: the steel-structured large scale warehouses, plants, supermarkets, shopping
malls, trade markets, stadiums, holiday villages, sanatoriums, hotels, villas, residences, and different kinds of green
houses. What’s more, equipment can be designed and manufactured as customers’ requests.
2.Components of Metal Floor Deck Sheet Roll Forming Machine

No. Name Unit Qty
1 Manual decoiler set 1
2 Main forming machine set 1
3 PLC control system set 1
4 Hydraulic pump station set 1
5 Post cut set 1
6 Electric motor set 1
7 Output table set 1

201725657 thumb - Floor Decking Cold Steel Forming Machinery
Production Process of Floor Decking Plate Sheet Roll Forming Machines:
Uncoiling→Feeding material into machine→Roll forming→Measuring length→ Auto cutting→ Products receiving
SHIPPING
1.One 40ft container for loading one set machine with manual decoiler;
2.The whole Wiped Anti Rust Oil, PLC controller covered by foam film;
3.Spare parts and some small parts packed in plastic tooling box;
4.All Components Fixed by steel wire with Container.

corrugated metal roofing making machine

corrugated metal roofing making machine

1. corrugated metal roofing making machine Components:
1. Decoiler
2. Coil sheet guiding and adjusting equipment
3. Film covered device(optional)
4. Main roll forming system
5. Hydraulic pump station
6. PLC control system
7. Cutting device
8. Run-out table
2.corrugated metal roofing making machine Work flow:
Decoiling the sheet—-sheet guilding—-film covering(option)—-roll forming—-PLC controlling—-hydraulic cutting—-receiving the finished panel

Fully automatic roofing sheet making machine 1 - corrugated metal roofing making machine
3.corrugated metal roofing making machine Technical Parameters:

No. Main parameter
1 Suitable to process Galvanized/Aluminum/Color steel sheet
2 Width of plate 1250mm
3 Thickness of plate 0.3-0.8mm
4 Rollers High grade 45# steel, with hard chrome plating
5 Forming steps 16
6 Sprocket chain 1.5 inch
7 Pump station power 4kw
8 Shaft 75mm, high grade 45# steel, heat treatment
9 Hydraulic oil pump CB-E310
10 Weight About 5.0 tons
11 Productivity 8-12m/min
12 Cutting head Cr12 mould steel with quenched treatment
13 Control system TAIDA brand PLC control
14 Voltage 380V 3Phase 60Hz
15 Motor power 4kw
16 Dimension About 6.8m*1.5m*1.5m
17 Hydraulic pressure 10-12mpa
18 Index error of length ±1mm
19 The temperature range of working line -35-50°