Sheet Roll Forming Machine

Sheet Roll Forming Machine

We are among the prominent organizations engaged in offering optimum grade Sheet Roll Forming Machine.The offered machines are manufactured using premium quality raw materials and modern technology under the direction of proficient engineers. In addition to this, the offered machine passes through various parameters of quality check in order to ensure its defect free nature and optimum functionality. Our prestigious clients can avail offered machine at industry leading prices.

DSC00931 300x169 - Sheet Roll Forming Machine

sheet roll forming machine is specially designed for Russian market. Different with other roofing sheet, C8 has lower and flat wave, something like IBR.  By this type, you can either use it as wall panel, roofing panel or AD word panel. This type is quite popular in the market. The following is about the C8 drawing profile for your reference:

arc roof tile forming machine 300x81 - Sheet Roll Forming Machine

Main Base

The main base is MS fabricated structure and adequately ribbed to minimize the distortion. It is accurately machined on top and bottom surfaces the threaded holes are made on the bed for positioning the stands.

Mill stands (Station)

The stands are mounted on the bed of the machine the line alignment can be easily done due to guide ways arranged on the bed of the machine. Each forming head consists of a fixed housing and sliding type out board housing. The mill stands will be arranged to locate shafts mounted on taper bearings. For the top shafts the bearings are housed in the cartridge type bearing blocks. The bottom shaft bearings are located in the bored machined in the housings. The bottom arbors are fixed in position whereas the top arbors along with cartridge blocks could be raised or lowered in vertical guides machined in housings.

Roll shafts
The roll shafts dia. 40mm will be manufactured from quality steel and will be keyed to locate tooling.


The drive to the roll former will be by means of a gear box system. The main drive will be provided by means of 1HP motor

Leave a Reply

Your email address will not be published. Required fields are marked *