Wall Panel and Tile Double Layer Roll Forming Machine

Wall Panel and Tile Double Layer Roll Forming Machine

For this wall panel and tile double layer roll forming machine, there are some detail information for your reference. This machine is not only with high quality but also with the smaller space and lower price.

No Specification of the material
1 Suitable Material Colored Steel plate, Galvanized steel
2 Width of the raw material 1250mm
3 Thickness 0.3mm-0.7mm

Machine Detailed Parameters:

1 Machine structure Guide pillar structure
2 Total power Motor power-7.5kw
Hydraulic power-5.5kw
3 Roller stations Up layer: about 11 stations
Down layer: about 18 stations
4 Productivity Up layer: 2-4m/min (excluding the cutting)
Down payer: 0-15m/min (excluding the cutting)
5 Drive system By chain
6 Diameter of shaft ¢70mm solid shaft
7 Voltage 380V 50Hz 3phases (Customized)
8 Container need 1x 40GP + 1x 20GP containers

2. The Chart of Process Flow

Wall Panel and Tile Double Layer Roll Forming Machine - Wall Panel and Tile Double Layer Roll Forming Machine

3. Packing & Delivery

  1. Deliver time: take goods after receiving deposit 80 days
  2. Packing: suitable of ocean transportation

20170806205412 - Wall Panel and Tile Double Layer Roll Forming Machine

4. Warranty

  1. Warranty: 1 year warranty since finishing the shipment
  2. Guarantee:

1: Guaranteed against malfunctions due to manufacturing defects for 1 year after date of shipment. Repairs will be made free of charge.
2: Repairs will not be performed free of change even during the guarantee period in the follow circumstances
–  Damage occurs due to a natural disaster
–  Malfunction occurs due to user error
–  Malfunction occurs due to modifications
–  Malfunction occurs due to further movement or shipment after installation
3:Air ticket, transportation cost, hotel, meals and 80$ per day shall be for purchaser’s account if manufacturer’s engineer has to be send to purchaser’s factory to maintain the machine during the guarantee period.

5. Payment Term

30% deposit by T/T in advance and 70% balance after inspection confirmation before shipment

Double Deck Glazed Tile Roll Forming Machine

Double Deck Glazed Tile Roll Forming Machine

1.What is the parameter of the glazed tile roll forming machine ?

Glazed tile roll forming machine technical parameters:
1 Cutting&Hydraulic type Double guide pillar
2 Hydraulic motor power 4kw,4kw
3 Hydraulic Pressure 10-12MPa
4 Voltage 380V /3phase/ 50 HZ (or as your requirement)
5 Cutting  drive Decelerating motor + Chain drive  gear all by high-frequency
6 Control System Panasonic /Siemens / Schneider / Delta PLC
7 Length measurement Encoder
8 Main Frame 300mm/350mm H-Beam or 350mm
9 Backboard Thickness 17mm/20mm
10 Chain Size  1inch/2inch
11  Feeding Material  Better as your drawing or from our designer
12  Feeding Thickness  0.18mm-0.8mm
13  Effective width  Better as your drawing or from our designer
14  Productivity  12-20/min
15  Roll Station  Upper layer:14rows& 14
Downlayer:13(according to different design)
16  Roller Diameter  70mm/75mm(depend on different design)
17  Roller material  45# steel
18  Cutter material  Cr12 mould steel heat-treated hardness of HRC = 60-62 degrees
19  Total Weight  2t-12t
20 Package of machine Waterproofing membrane, standard export packing
21 Roll fromiomg machine of the Components Manual decoiler——————-2 set(5t)
Guiding Platform——————1 set
Coil Strip Leveler——————1 set
Main Machine of Roll Forming——1 set
Hydraulic Station——————1 set
Supporter Table——————-1 set
Glazed tile roll forming machine technical parameters can be changed, according to customer’s need.

2.Glazed tile roll forming machine picture for reference

Double Deck Glazed Tile Roll Forming Machine 9 - Double Deck Glazed Tile Roll Forming Machine

3.What are the other roll forming machine for choosing?

Zhongtuo cold roll forming machinery co., ltd is a professional supplier for roll forming machine.
We not only can provide an extensive line of products but also with the best price.  We can make these machines for you. For example roof and wall panel machine, tile roof machine, purline forming machine,shutter door machine, floor decking machine and other associated equipment.
Our roll forming machines use PLC control to ensure high accuracy and easy operation.

Double Deck Glazed Tile Roll Forming Machine - Double Deck Glazed Tile Roll Forming Machine

Modular Steel Roof Tile Roll Forming Machine

Modular Steel Roof Tile Roll Forming Machine

1. Components for the modular steel roof tile roll forming machine

The roll forming machine includes manual uncoiler unit, sheet guiding equipment, roll forming system, cutting equipment, hydraulic station, electric controlling system and run out supporting table.

2. Technical Parameters

Material specification Aluminum, alu-zinc, galvanized and pre-painted galvanized steel.
Thickness 0.3-0.7mm.(perfect is 0.4mm-0.6mm)
Main motor power 5.5 kw.
Hydraulic station power 5.5kw.
Feeding width 1250mm.
Cover width 1100mm
Yield stress 235Mpa (33KSI) ~ 345Mpa (50KSI).
Roll forming Speed 15-18 m/min
Cutting Tolerance +/-2.5mm(length≤5000mm); +/-3.0mm(5000mm<length≤10000mm).
Manual Uncoiler Max. Capacity: 5000kgs.
Coil inner diameter 508mm.
Voltage 380V,3 Phase,50HZ,Or As per customer’s request.
Numbers of stands 15 stations
Type of cutting Roll-formed and length-set profile cutting.

Steel roof roll forming machine1 - Modular Steel Roof Tile Roll Forming Machine

3. Material of Main Equipment:

Roller Material High grade S45C forged steel, coated with hard chrome.
Active Shaft Material High grade S45C carbon wrought steel, diameter 76mm.
Electric Elements PLC control console, touch screen and transducer, from Siemens, Germany.
Other elements, from Schneider Electric, Germany.
Cutter Blades Cr12MoV steel with quenched treatment, hardness HRC58~61,
wear-resistance, good steel structure, long life.

Process Sketch:

Uncoiling →Infeed guiding →Roll forming →Pressing→Measure Length&Shearing →Sheet to Support Table
Packaging & Shipping
1.One 20ft container for loading one set machine with manual decoiler;
2.The whole Wiped Anti Rust Oil, PLC controller covered by foam film;
3.Spare parts and some small parts packed in plastic tooling box;
4.All Components Fixed by steel wire with Container.

High Quality Galvanized Roof Panel Steel Roll Forming Line

High Quality Galvanized Roof Panel Steel Roll Forming Line

General Description:
WLFM series roll forming machine consists of uncoiler and its base, infeed guide, fixed position driven forming stations, cutting equipment, hydraulic station, PLC control console, and unload product run out table.
Our company has hundreds of profile models for this series roll forming machine, such as WLFR25-248-992, WLFR50-250-1000, WLFR18-76-998 and so on. we can design different kinds of profile and fittings for machine, as per customers’ requirements.
1. Components for steel roofing roll forming machine:
The roll forming machine consists of manual uncoiler, infeed guide, fixed position driven forming stations, cutting equipment, hydraulic station, PLC control console, and manual unload product run out table.

1 - High Quality Galvanized Roof Panel Steel Roll Forming Line

.2. Technical Parameters:

Material specification Aluminum, alu-zinc, galvanized and pre-painted galvanized steel.
Thickness 0.3 mm to 0.7mm.
Main motor power 4 kw.
Hydraulic station power 3 kw.
Feeding width 914/1000/1200mm.
Cover width WLFM 18-76-760/836/988 is 760/836/988mm respectively.
Yield stress 235Mpa (33KSI) ~ 345Mpa (50KSI).
Roll forming Speed 12 m/minute.
Cutting Tolerance +/-2.5mm(length≤5000mm); +/-3.0mm(5000mm<length≤10000mm).
Manual Uncoiler Max. Capacity: 5000kgs.
Coil inner diameter 508mm.
Voltage As per customer’s request.
Numbers of stands 18 stands/stations/pairs.
Type of cutting Roll-formed and length-set profile cutting.

2 - High Quality Galvanized Roof Panel Steel Roll Forming Line

3. Material of Main Equipment:

Roller Material High grade S45C forged steel, coated with hard chrome.
Active Shaft Material High grade S45C carbon wrought steel, diameter 76mm.
Electric Elements PLC control console, touch screen and transducer, from Siemens, Germany.
Other elements, from Schneider Electric, Germany.
Cutter Blades Cr12MoV steel with quenched treatment, hardness HRC58~61,
wear-resistance, good steel structure, long life.

 

4. Process Sketch:
Uncoiling the sheet Infeed guiding Roll forming →Measure length →Cutting the panel →Panels to the supporter (option: automatic stacker).

20170806205412 - High Quality Galvanized Roof Panel Steel Roll Forming Line
5.Standard Equipment of Machine:
Manual Uncoiler                1set

   Infeed Guide                      1set
   Roll Forming Station          1set
   Post-cut Equipment           1set
   Hydraulic Station                1pc
   PLC Control Console         1pc
   Product Support Table       2pcs