Roofing panel machine

The roofing panel machine is rolled or cold-rolled strip steel, metal plate, galvanized plate, color steel as raw materials. Light metal profiles of different section shapes are obtained by bending at room temperature.  There are many types roofing panels used in houses, offices, warehouses,  workshops and cars panel.

The main body of roofing panel machine without welding, all the use of cast steel, the whole machine will not produce stress and lead to the host body deformation.

11 1 - Roofing panel machine

High quality rollers of roofing panel machine can produce not only beautiful but also high quality profile. That will satisfy your customers. And its working process is so easy to learn.

liuchengtu - Roofing panel machine

Features of roofing panel machine:

1.Take advanced method to make sure machine quality.
2.More options to make different types roofing sheet.
3.Smart machine and economical option.
4.Long time to us.

 

Floor Decking Cold Steel Forming Machinery

Floor Decking Cold Steel Forming Machinery

Floor deck are widely used in building: the steel-structured large scale warehouses, plants, supermarkets, shopping
malls, trade markets, stadiums, holiday villages, sanatoriums, hotels, villas, residences, and different kinds of green
houses. What’s more, equipment can be designed and manufactured as customers’ requests.
2.Components of Metal Floor Deck Sheet Roll Forming Machine

No. Name Unit Qty
1 Manual decoiler set 1
2 Main forming machine set 1
3 PLC control system set 1
4 Hydraulic pump station set 1
5 Post cut set 1
6 Electric motor set 1
7 Output table set 1

201725657 thumb - Floor Decking Cold Steel Forming Machinery
Production Process of Floor Decking Plate Sheet Roll Forming Machines:
Uncoiling→Feeding material into machine→Roll forming→Measuring length→ Auto cutting→ Products receiving
SHIPPING
1.One 40ft container for loading one set machine with manual decoiler;
2.The whole Wiped Anti Rust Oil, PLC controller covered by foam film;
3.Spare parts and some small parts packed in plastic tooling box;
4.All Components Fixed by steel wire with Container.

corrugated metal roofing making machine

corrugated metal roofing making machine

1. corrugated metal roofing making machine Components:
1. Decoiler
2. Coil sheet guiding and adjusting equipment
3. Film covered device(optional)
4. Main roll forming system
5. Hydraulic pump station
6. PLC control system
7. Cutting device
8. Run-out table
2.corrugated metal roofing making machine Work flow:
Decoiling the sheet—-sheet guilding—-film covering(option)—-roll forming—-PLC controlling—-hydraulic cutting—-receiving the finished panel

Fully automatic roofing sheet making machine 1 - corrugated metal roofing making machine
3.corrugated metal roofing making machine Technical Parameters:

No. Main parameter
1 Suitable to process Galvanized/Aluminum/Color steel sheet
2 Width of plate 1250mm
3 Thickness of plate 0.3-0.8mm
4 Rollers High grade 45# steel, with hard chrome plating
5 Forming steps 16
6 Sprocket chain 1.5 inch
7 Pump station power 4kw
8 Shaft 75mm, high grade 45# steel, heat treatment
9 Hydraulic oil pump CB-E310
10 Weight About 5.0 tons
11 Productivity 8-12m/min
12 Cutting head Cr12 mould steel with quenched treatment
13 Control system TAIDA brand PLC control
14 Voltage 380V 3Phase 60Hz
15 Motor power 4kw
16 Dimension About 6.8m*1.5m*1.5m
17 Hydraulic pressure 10-12mpa
18 Index error of length ±1mm
19 The temperature range of working line -35-50°

One roofing sheet machine for making three type roofing sheet, possible?

Question: whether one roofing sheet machine can make three or more drawing profiles sheet, I mean one layer not double layer? How about the price and machine any different with others?

Answer: Roofing sheet rolling forming machine is different with others, normally speaking one machine one layer can not be used to make more than one type roofing sheet as the mold size is made based on the drawing profile. Once the wave height=roller mold height is done, it is hard to change. So three important elements decides the roofing sheet machine types:

wave height, wave shape and wave distance. But the following situation is an expection:

1024x523 - One roofing sheet machine for making three type roofing sheet, possible?

There are three drawing profiles, from size and valid width, they are different like the valid width and the input coild width. But they are same in teh wave height, wave distance and the overlap method. So those three could be made one by machine.

roofing sheet - One roofing sheet machine for making three type roofing sheet, possible?

if you want to run the factroy of roofing panel machines, this kind of situation will be frequenctly happen. As different coustomers will take different input coil width coil to your factroy, but all could be processed, just the valid width will be different. Meanwhile if you want to make more types, you can add one more stepping system, you also could make gladed tile making machine. One machine for many types to cater the market needs. The following pictures of the machine for your reference.

glazed tile rolling machine 1024x768 - One roofing sheet machine for making three type roofing sheet, possible? QQ图片20170414162340 1024x768 - One roofing sheet machine for making three type roofing sheet, possible?

For this question, if you have better idea, you are welcome to contact us at any time.

Full Hard Galvanized Sheet 18-76 Corrugated Roll Forming Machine

Full Hard Galvanized Sheet 18-76 Corrugated Roll Forming Machine could be used to process SG550 thickness up to 1.5mm fully hard metal sheet. 18-76 Corrugated Roll Forming Machine  means it can produce the round weve corrugated roofing sheet rolling forming machine.

Full hard sheet 1024x589 - Full Hard Galvanized Sheet 18-76 Corrugated Roll Forming Machine

The above drawing profile does not have too many difference compared with other round wave  but one thing is different that is  the hardness of the mateiral and the thickness. Normally we only need to process thickness around 0.2 to 0.6, but this one we can make it happen around 1.5mm or SG550 stainless steel. The following machine picture is about this type machine:

Small round wave roofing sheet machine 1024x795 - Full Hard Galvanized Sheet 18-76 Corrugated Roll Forming Machine

Full Hard Galvanized Sheet 18-76 Corrugated Roll Forming Machine difference with others:

  1. We use the whole set of molding rollers instead of separated.
  2. We use the strong shaft diameter around 90.
  3. We use the big motor and strong thickness frame

For this type drawing profile is quite popular in many countrys, if you want to make the same, please contact us at any time.

We promise the lowest price and the best quality.

namecard thumb - Full Hard Galvanized Sheet 18-76 Corrugated Roll Forming Machine

Standard Minrib Profile 10-71-780/1062 Roll Forming Machine

Standard Minrib Profile 10-71-780/1062 Roll Forming Machine could be used to make the standard minrib roofing sheet in batch fully automaitic. The following drawing profile is the one which I named as Standard Minrib Profile 10-71-780/1062 Roll Forming Machine.

The description of this Standard Minrib Profile is that the wave distance is 71-wave, height is 24, the valid width could be many, like you can output 915mm or 1000mm or another others, depends on the input coil width. The following two sizes are mostly popular, like 1220mm and 915 as the feeding coil width.

standard Minrib - Standard Minrib Profile 10-71-780/1062 Roll Forming Machine

Standard Minrib Profile roll forming machine working speed is aroound 25m.min, the following are machine picture for your reference:

Standard Minrib Profile Machie - Standard Minrib Profile 10-71-780/1062 Roll Forming Machine

Here are Standard Minrib Profile roll forming machine paramters for your reference:

3.Forming system

 

1).Number of forming steps:17steps

2).Material of shaft:45# steel .
Outer diameter=80mm

3). material of roller:45# steel

4).Main motor power:5.5kw

5).Max Speed of forming:10m/min

6).Voltage:380v 50Hz 3 phases

 

For this machine, if you want to know more information, please contact us at any time.

namecard thumb - Standard Minrib Profile 10-71-780/1062 Roll Forming Machine

IBR wave height 10 & 29 Double Layers Roll Forming Machine

Double layer roofing sheet machine refers to one main roofing sheet machine which has two layers for diffferent types of drawing profiles. As the panel sheets has many types, they are different in the wave height, wave distane , wave shape and others. The following are two drawing profile for your reference:

Roofing sheet drawing profile - IBR wave height 10 & 29 Double Layers Roll Forming Machine

For our double layer roofing sheet rolling forming machine could be used for making any type drawing profiles. For the machine deigning ideas, we have many type, I am sure that we have one type that you like. Taking a random double layer machine we designed for American for example.

double later 1 1024x768 - IBR wave height 10 & 29 Double Layers Roll Forming Machine

For the double layer roofing sheet shearing system, we have two options for your reference:

One hydraulic shearing and another is motor shearing like the one I showed in the above picutres. Any type you like we can design for you.

For this type machine, if you want to know more information, please contact us at any time.

namecard thumb - IBR wave height 10 & 29 Double Layers Roll Forming Machine

Metal Roofing Colored Tile Sheets Machine

Metal Roofing Colored Tile Sheets Machine

tandard Equipment of Machine:

Uncoiler 1 set
Guiding Equipment 1 set
Roll Forming Equipment 1 set
Cut To length Equipment 1 set
Hydraulic Station 1  pc
Control box 1  pc
Supporter Table 2  pc

Roofing Tile Roll Forming Machine 300x225 - Metal Roofing Colored Tile Sheets Machine
The Technical Parameters:

Suitable raw material Color steel sheet; Galvanized steel sheet
Thickness of the material 0.3m to 0.8mm
Yield strength of material 235Mpa
Uncoiler’ s loading capacity Max. Capacity: 5000Kgs. (can be increased to be 10 tons)
Forming speed About 10-15m/min
Main motor power 4Kw(Depend on final design)
Hydraulic station power 4Kw(Depend on final design)
Controling System Panasonic PLC & converter
Votage 380V, 3 phase 60Hz or according to at buyer’ s requirment
Quantity of the roller group 18 groups(depend on final design)
Machine dimension About 9.8m*1.3m*1.3m(depend on final design)
Total weight About 6500kgs(depend on final design)

Competitive Advantage:
1. save money
2. easy installation
3. perfect service
4. excellent quality
5. Operate easily

corrugated steel sheeting roll making machine

corrugated steel sheeting roll making machine

Bending precision: the maximum profile deviations (dimensions and shape) shall not exceed the tolerances specified as following data (or equivalent tolerances);
Bending quality: ability to bend the profiles of the specified configuration at the specified maximum steel thickness; cracking of the steel or metal coating is not permitted for all required steel grades;
Maximum production speed: not less than 15 metres per minute (excluding cutting);
Material: 0.3-0.8mm, GI or clor steel, yelid strength: 195-235Mpa;
If you have your own special requirements,our machine can be also customized.

12 300x212 - corrugated steel sheeting roll making machine
Main Features
1) Material of the profile: GI or color steel
2) Thickness range: 0.3-0.8mm
3) Main motor power:5.5kw, AC motor, motor inside of main machine (Brand: Guomao of China) (according the final design)
4) Machine Voltage, Frequency, Phase: 380 V, 50 Hz, 3Phase
5) Roll station: about 18 stations (according the final design)
6) Roller material:ASTM1045 chrome plated surface with chrome,CNC,
7) Shaft diameter: ¢76mm material: SAE1045 with quenching and tempering
8) Machine roll forming speed:not less than 15m/min
9) Transmission: by chain, one inch, single line
10) Roll former has leveling bolts in the base for adjust the leveling
11) Machine base frame adopt H beam welding steel
12) In the main roll forming machine have 2 buttons for urgency stop if happen any malfunction.
13) Machine adopt new station to make machine more strong
14) To avoid accidents,all of drive part adopt protect cover
15) Color of machine: Blue and yellow (or base on customer request)

11 300x68 - corrugated steel sheeting roll making machine