Composite plate machine can generate the following conditions during use

Composite plate machine can generate the following conditions during use

(1) Composite board machine start the machine idle for several cycles, ensuring to cut sheet metal of different thickness, from thin to thick under normal circumstances. Ensure that the users are familiar with composite board machine performance.

(2) It must be adjusted different blade clearance when doing different thickness shear test. If the corresponding blade gap doesn’t adjustment, the impact of the blade will durability.

(3) Composite panel is turned on in the shearing process gauge switch, observe oil pressure value, when cutting a 12 mm plate, the pressure should be less than 20 MPa. This remote relief valve No.9, factory pressure settings 20-22 MPa, the user must comply with this requirement, must not increase the pressure to cut surface material exceed a predetermined, resulting in damage to the machine.

(4) Keep the sound balance when operating. If the composite board machine has noise, you should stop and check it.

(5) When operating the composite panels, the temperature of tank must raise less than 60 degrees, if it goes beyond the limit, you should close it done to let it rest.

imagestore20150822e5fbdd25 a996 4e6e 9a68 7c234a3c4299 300x168 - Composite plate machine can generate the following conditions during use

Differences between the hydraulic motor drive and motor drive

Differences between the hydraulic motor drive and motor drive

Hydraulic system has been more widely used in various industrial sectors and in many sectors agriculture, forestry, animal husbandry and fishery, and the more advanced equipment, some of which use the hydraulic system on the more.
In paper, textiles, plastics, rubber and other light industry, the paper machines, textile machines, injection molding machines, rubber briquetting machines and other equipment have an extensive use of the hydraulic system. In mining, petroleum, metallurgy, pressure processing and other heavy industry, the hydraulic system is more widely used because it can deliver a lot of energy and weight of the device is smaller than others. For example, the hydraulic system on the device holder mine, oil drilling platforms, blast furnace top equipment, billet caster, strip mill reduction systems, presses and quick forging machines, all of them are used the system. In other industries such as electric power, construction, water conservancy, transportation, shipbuilding, aerospace, automotive and so on, the hydraulic system is also an important component. As for the extensive use of advanced technology sectors such as aerospace, military and others, hydraulic system is widely used. The machine tool industry was one of the first to use hydraulic technology. At present, the motor drive technology development in exchange for leaving the motor drive inverter technology to recapture a lot of hydraulic drive range of applications, but in the power drive and reciprocating motion of the occasion, the hydraulic system are still widely used.

Advantages and disadvantages of hydraulic transmission system
The widely used transmission mode are mechanical transmission, electric drive, hydraulic drive and pneumatic drive. Each have their own advantages and disadvantages. Mechanical transmission is carried out by transmission gear, rack, worm, worm gear, belt, chain, levers and other mechanical parts, it is the development of the earliest and most common form of transmission. It has a transmission is accurate and reliable, simple, intuitive and easy to grasp mechanism, the load change has less impact on the drive ratio and the environmental impact is small. But for the automatic control, simply by mechanical transmission to complete the structure becomes complicated and cumbersome, meanwhile it has some disadvantages, for example, being difficult to operate long-distance, large operating force, the freedom of mounting position change is so small, so gradually in many cases other transmission manner replace it.
Electric drive is carried out by electric drive and control, using AC motors to drive, simple and cheap, therefore it is the most widely used and also the various transmission components. But AC motors are generally difficult to perform continuously variable transmission, which can be achieve by a DC motor, but more expensive. Currently thyristor AC motor technology enables a continuously variable transmission is greatly simplified, but the application in high-power and low speed high torque and other occasions has yet to be further improved. Electrical control, in particular computer control, with signal transfer and change convenient, easy remote manipulation and other unique advantages, so in situations that require high degree of automation is essential.

Difference between solid shaft and hollow shaft of tile press

Difference between solid shaft and hollow shaft of tile press

When ordering the tile press, Some customers like to ask what is the difference between solid shaft and hollow shaft, general pressed tile thickness is 0.5 to 0.6 or less, and a thickness of 0.8 such as color steel molding effect is not very good, solid axis tile press is different, it can be arbitrary repression 0.8 or less of all the following material sheet such as galvanized sheet and color steel, and molding effect, tile press has a long service life, so when chose the tile press, we must determine the tile press is made of steel with a solid shaft . Cost of C course steel mill with solid shaft than that with the hollow shaft must be higher, so we shouldn’t seek cheaper when choosing it, each manufacturer cherish every customer and will not just raise prices. When the choice is generally less than 23,000 SBC, be careful to buy, because some pressure watts Factory home is not only thinner shaft diameter solid shaft but also no good platen effect, hope that buyers choose carefully. Our factory plant to provide a long-term service and a product tracking.
With the development of technology and the support of our customers, the company continued to expand and the scale of production capacity is also rising, and products are toward standardized scale development. At present many manufacturers use hollow shaft on the tile press in order to profit more, which is seriously affecting the quality of the equipment and deceive customers, and now the pressure watts factory will help you to identify to prevent the fraud. Many customers don’t know how to verify the shaft is solid or hollow when buying tile press, and some manufacturers produce hollow shaft to customers who want a low price. How can we know the shaft is hollow or solid? First recognition is to open tile press and withdraw a shaft to see if it is solid. Second, if you think split tile press is too much trouble, then you can ask the tile press weight, generally the weight of SBC is about 2.5 tons, the hollow shaft is about 2 tons. The third method of identification is not to yield to the temptation of cheap, and do not buy the ordinary 840,860,900 ordinary veneer tile press if the price is less than $ 20,000, because in this situation the product will not be solid shafts, remind you keep your eyes open to prevent fooled. For color pressed machine, we have to focus on the part of the pressure-watt machine. Many buyers also want to know whether or not the machine they hope to buy is value for money. Then we will introduce from the main components of pressure-watt machine, axis. Why we say the axis first? Because the pressure of shaft is the first major when pressing color plate, and then we can the beautiful color plates, so the selection of said shaft is crucial.

If you want to know more information about the cold roll forming machine you can contact us with email  :roofingmachine@zhongtuocn.com

 

You know tile press life factors which it?

You know tile press life factors which it?

For pressure-watt machine, the life of the hydraulic system is an important manifestation of the comprehensive value of steel tile equipment, one of the main system hydraulic system type tile press in the production and manufacturing process, there will be a few factors that point will cause greater impact, following the extension of Roll forming equipment Co., Ltd. to introduce the factors that affect the life of the tile press.
a, steel tile equipment hydraulic pneumatic device power and speed. Tile press in the technical parameters, the relationship between power and speed of the rotor to the extent of the impact of hydraulic rod hardened, thereby affecting the life of the hydraulic system, so we have to set the technical parameters within a certain range, can not appear too big or too small situation, thus affecting the service life of tile press.
b, steel tile inside the device size of the gap. Various hydraulic and hydraulic roller gap between the bars should be kept stacked in uniform and consistent, can not appear too close or too far from the case, a pressure a little pressure will lead to the production of the product quality is not balanced so that is what we need to pay attention in steel tile equipment, glazed tile press and other machinery production above are a common occurrence.
c, materials and quality hydraulic system. Structure fabrication of the hydraulic system of the hydraulic axis on mechanical properties after heat treatment. Reasonable scientific manufacture casting process and heat treatment process is an effective method to use when the hydraulic axis prone to breaking solution, after heat treatment of manufacturing raw materials will increase, compact overall increase in raw materials and pressure resistance, to achieve long-term use deformation and fracture of the case does not appear.
These are the extension of roll forming equipment Ltd. summed up by years of work experience in a few tips, I hope for your help, if you have any other technical questions, please call our company!